<dd id="zkfju"><track id="zkfju"></track></dd><tbody id="zkfju"></tbody>


    Lab Testing Line

    Optimized System for Ink Jet R&D Laboratory

    lab testing line S-SIF I-cbt.jpg


    S-SIF I

    · Single cartridge housing applies Cobetter 126 filter cartridge.

    · Low hold-up volume for minimal fluid loss. 

    · Inlet,outlet ,vent and drain ports are conveniently located on the housing system. 

    · Electro-polished finish for easy clean-up. Internal Ra 0.3μm, External Ra 0.4μm. 

    · Easy to clean, easy to drain.


    Low Volume Production Line


      low volume line S-SIF II-cbt.jpg

    S-SIF II

    · Inverted Design 

    · Easy to Clean 

    · Easy to Drain Contaminants

    low volume line S-SIF III-cbt.jpg





    S-SIF III

    · Design for 100L/Hr Flow Rate.


            


    Operating Conditions

        Item

        Description

        Specification

        Pump

        Ingersoll-Rand,

        Aro Diaphragm Pump

        Stainless Steel DN25

        Housing

        Cobetter H-SCF-1

        Liquid Filter Housing

        3 stages, 1-round, 

        5/10 " length

        Tube

        Fine Polishing Stainless Steel

        1 " (DN25)

        Connection

        Tri-clamp    1 " (DN25)

    * 3 Stages of Filtration; Housing material SS316L

    Surface Finish: Electro-polished, Internal 0.3μm / External 0.4μm




    Stainless Steel Filter Holder  H-DMF 

    Batch Testing Sanitary-grade, Pressure Filtration

    H-DMF-cbt.jpgCobetter H-DMF Stainless Steel Disc Filter Holders have been designed for ink jet ink filtration. This kind of housing provides higher safety than PP membrane holder and glass membrane holder.



    Material of Construction

    Polishing Type

    Mechanical Polished / Electro-polished

      Surface Option

    Internal 0.3μm / External 0.4μm



    Ordering Information

       Series

    Number of MembraneCartridge LengthMaterialInlet/Outlet Seal Material

       H-DMF

     

    1= Single Layer

    2= Double Layer

    47=47mm

    60=60mm

    90=90mm

    142=142mm

    150=150mm

    200=200mm


    A= 304

    B= 316L

    T= Tri-clamp

    S=Slilicone

    E=EPDM

    V=Viton

    P=Encapsulated Viton




    Mass Production Line

    Design for 1500L/Hr flow rate

        SIF02-cbt.png       SIF01-cbt.png

                                      S-SIF IV                                                                                                 S-SIF V


    SIF03-cbt.png


    ·  4 Stages of Filtration; Housing Material SS316L
    ·  Surface Finish; Electro-polished; Internal 0.38μm/External 0.4μm
    ·  Max flow rate for this system can reach 3000L/Hr.



    Operating Conditions

        Item

        Description

        Specification

        Pump

        Ingersoll-Rand, Aro Diaphragm Pump

        Stainless Steel DN25

        Housing

        Cobetter H-TBF Top Inlet Bag Housing

        Cobetter H-SCF Liquid Filter Housing

        1 stage: single bag

        2 -4 stages: 9-Round /10" Lengt

        Tube

        Fine Polishing Stainless Steel

        1.5 "

        Connection

        Tri-clamp    1.5 "


    SIF04-cbt.png

    Filtration Before Filling

    Removal of agglomerate again to ensure ink quality.


    ·  1 Step Filtration

    ·  Cobetter H-SCF Filter Housing Series







    For technical data sheet or application inquiry, you are more than welcome to contact our sales representative by info.industry@cobetterfilter.com or leave a message.




    免费一级无码婬片AA片高潮喷水,91久久综合亚洲鲁鲁五月天,97人妻人人揉人人躁人人