Plasma Separation Membrane
Whole blood separator in membrane separation technology is also called as blood cell separation membrane or plasma separation pad. The PSM series plasma separation membrane developed by Cobetter is a new type of plasma separation filter, which is specifically developed for POCT diagnostics. It can quickly separate plasma from whole blood without hemolysis and no pre-treatment is required.
The final reaction sample of POCT(point-of-care-testing) is mainly plasma. Traditionally plasma can be obtained through centrifugation, but it's difficult to conduct and requires large sample volume as well as long operating time. Therefore, membrane separation technology stands out in this application, with advantages of small sample volume requirement, short separation time, low possibility of hemolysis and easy to use. Now plasma separation membrane plays an important role in POCT and provides a fast red blood cell removal solution for POCT diagnostics.
Physical retention, highly asymmetric pore structure specifically designed for whole blood plasma separation. Large pores in the membrane physically retained red blood cells and white blood cells in the whole blood, and the plasma flows out from the small pores on the downstream side of the membrane, rapidly separating the plasma without hemolysis.
- High efficiency. No centrifugation is required, plasma can be quickly separated within 2 minutes, thus saving plasma collection time.
- Low non-specific binding. No combination with key biomarkers, reducing the impact on diagnostics signal.
- Low hemolysis. There is anti-hemolysis treatment on the membrane to reduce the possibility of whole blood hemolysis.
- Highly asymmetric pore structure, low hematocrit dependence and outstanding flow rate.
- Reliable lot-to-lot stability, low CV value.
- Plasma recovery volume≥10μL @40μL whole blood.
- Imported Japan production line and uniform material.
- Available in customized width for roll type and customized die-cutting shape.
For technical data sheet or application inquiry, you are more than welcome to contact our sales representative by sales@cobetterfilter.com or leave a message
Typical Applications
- Plasma Separation for Whole Blood
- Dry Biochemical Test Strip
- Immunochromatographic Diagnostics
- Plasma Separation for Microfluidic Diagnostics
- Chemiluminescence Sample Pretreatment
Specification
| Product | PSM Series |
| Material | Hydrophilic & Highly Asymmetric Polyethersulfone |
| Substrate | None |
| Surface Color | White |
| Thickness | 0.34 ± 0.03 mm |
| Plasma Separation Time | ≤ 2 min |
| Plasma Recovery Volume @ 40μL Whole Blood | ≥ 10 μL |
| Recommended Blood Volume | 35 - 45 μL/cm2 |
Perfoemance
SEM Graph Before and After Plasma Filtration
Comparison of Blood Filtration Effect
Cobetter PSM series whole blood separation membrane shows excellent plasma separation ability without hemolysis.
Test Method:
a. Cover the plasma separation membrane on the nitrocellulose membrane same as vertical flow pad.
b. Test the strips with different HCT whole blood samples according to the recommended blood volume for membrane.
c. After plasma separation is completed, overturn the RBC separator to one side to directly show the separation performance of the membrane.
For technical data sheet or application inquiry, you are more than welcome to contact our sales representative by sales@cobetterfilter.com or leave a message
Find Your Venting Solution for Microfluidic Chips :
COPYRIGHT 2014 Hangzhou Cobetter Filtration Equipment Co.,Ltd ALL RIGHTS RESERVED.
